A comprehensive range of Servo Drives / Motors combined with high-performance motion
controllers provides complete end-to-end solutions addressing single axis point-to-point
system through to fully synchronised 96 axis systems.
Motion Controllers with standard pulse type commands or network command (SSCNET)
offers a choice of control topology complimented by range of software / functions enables
address ability to wide range of application spectrum.
Servo Motors consisting ofJ2-Super/J3 Series and Amplifiers with wide range of motors (all
fitted with a standard 131,072/262,144 PPR absolute encoder) and wide amplifier range (up
to 55kw) has taken Motion Control to a new level.
|
Product Range: Servo |
| |
MR-ES |
MR-J2S |
MR-J3 |
| Rating |
0.1 - 2 kW |
0.05 - 55 kW |
0.05 - 55 kW |
| Control Command |
Pulse, Analog |
Pulse, Analog, Network
(SSCNET) |
Pulse, Analog, Network
(SSCNET, CC-Link) |
| Encoder Resolution |
131072 PPR |
131072 PPR |
262144 PPR |
| Frequency Response |
500 Hz |
550 Hz |
900 Hz |
| Control Models |
Position, Speed, Torque |
Position, Speed, Torque |
Position, Speed, Torque |
| Positioning System |
Incremental |
Incremental / Absolute |
Incremental / Absolute |
| Servo Tuning |
Auto / Manual |
Auto / Manual |
Auto / Manual |
|
| |
Product Range: Motion Controller |
| Specification |
Stand Alone Controller |
System Q |
| MR-MQ-100 |
Q170MCPU |
Q172CPU |
Q173CPU |
| Number of Axis |
1 |
16 |
8×3 |
32×3 |
| Motion Network |
SSCNET ||| |
SSCNET ||| |
SSCNET/SSCNET ||| |
SSCNET/SSCNET ||| |
| Programming Language |
Motion SFC, Mechanical
Support Language |
Motion SFC, Mechanical
Support Language |
Motion SFC, Mechanical
Support Language |
Motion SFC, Mechanical
Support Language |
| Sequence CPU |
NA |
Built in Q03UDCPU |
TBC Separately |
TBC Separately |
| Peripheral Interface |
Ethernet SSCNET ||| |
RS232, USB,SSCNET |||
Ethernet, CFC |
RS232, USB,SSCNET |
RS232, USB,SSCNET |
| Operation Cycle |
0.44 Msec |
0.44 Msec |
0.88 Msec |
0.88 Msec |
|
|
Application Reference
Software |
|
MR-MQ100
